– Complies with the 1428.4.1:2009 standard
– Made from Marine Grade 316 stainless steel
– High resistance to corrosion makes it the definitive material to use to withstand the tough weather
– The S26 series is introduced to simplify installation process for soft substrates e.g Timber , Vincyl and Carpet.
– It cuts the cost in the most expensive part of the whole TGSI system installation by up to 30%
– Testing accredition : AS/NZA 4586 Appendix A – Wet Pendulum 4S “W” AS/NZS 4586 Appendix D -Oil Wet Ramp Test “R12”
–Testing accredition : AS/NZS 1428.4 Wet & Sry Luminance Reflectance : Dry 25.1 / Wet 19.5 Mean Contrast Range 10.8-45.5
Installation Tips :
1. Depending upon the installation, a small amount of polyurethene or epoxy glue may be beneficial under the TGSI to give extra hold
Be careful with use, as cleaning off excessive adhesive can be time consuming.
2. Insallation should be strictly in accordance with AS/NZS 1428.1.1:2009. Contact us if any doubt.
3. The standard allow a plus minus 10mm tolerance in installation from the hazard. Avoid positioning studs along substrate joints as
costly post installation “pull outs” will often occur.
4. We recommends the use of template for correct installation. Contact us for quote for template
5. With Scorpio, make certain the head of the screw used is flush or lower than the top of the TGSI dome.
Stainless Steel Tactile
$1.00
S26-CR10 Scorpio
Concentric rings on top surface with a polished rim
and #8 gauge countersink hole.
316 Marine Grade Stainless Steel
(316 SS screws available as optional extra)
Top Dome 25mm
Base of Dome 35mm
Height of Dome 5mm
Stem Diameter 6mm
Stem Length 12mm
Suitable substrates
Most soft substrates with accept a screw attachment
including timber , vinyl flooring , and carpet
Weight | 0.03 kg |
---|---|
Material | Stainless Steel |
Product Type | S-Series |
Ceramic TGSi Tile Ivory Hazard (11 tiles / sq M supply only)
Dimensions :
Top of Dome 25mm
Bottom of Dome 35mm
Height of Dome 5mm
Tile Dimensions :
300x300mm
Tile Thickness :
10mm
AVAILABILITY: In stock
316 Marine Grade Stainless Steel Plate
295mm Directional Strip with Stems and no grooves on Rim
Milled Bevelled Edge.
Dimension
300x600x2mm(44 Strips /plate)
Suitable substrates
Natural Stone ( Granite , Marble Sandstone, Slate
Blue Stone , Basalt , Travertine etc….)
Engineered Stone ( Caesar Stone, Quantum Stone etc…)
Concrete Asphalt
Timber , Rubber Vinyl Flooring
Ceramic
AVAILABILITY: In stock
AusTac SS 316, 10 Ring Top, Milled Bevelled Edge
Black Polymer Bevelled Edge
316 Marine Grade Stainless Steel
Dimensions
Top Dome 25mm
Base of Dome 35mm
Height of Dome 5mm
Stem Diameter 6mm
Stem Lenght 12mm
AVAILABILITY: In stock
Stainless Steel TGSI -Yellow Carborundum Top
AusTac SS 316, 10 Ring Top, Milled Bevelled Edge
Yellow Carborundum Top
316 Marine Grade Stainless Steel
Dimensions
Top Dome 25mm
Base of Dome 35mm
Height of Dome 5mm
Stem Diameter 6mm
Stem Lenght 12mm
AVAILABILITY: In stock
Stainless Steel TGSI – Long Pin
AusTac SS 316 Long Pin 10 Ring Top, Milled Bevelled Edge
316 Marine Grade Stainless Steel
Dimensions
Top Dome 25mm
Base of Dome 35mm
Height of Dome 5mm
Stem Diameter 6mm
Stem Lenght 25mm
AVAILABILITY: In stock
Stainless Steel TGSI -10 Ring top & 4 Ring Bevelled edge
AusTac SS 316, 10 Ring Top, 4 Ring Bevelled Edge
316 Marine Grade Stainless Steel
Dimensions
Top Dome 25mm
Base of Dome 35mm
Height of Dome 5mm
Stem Diameter 6mm
Stem Lenght 12mm
AVAILABILITY: In stock
Stainless Steel TGSI -10 Ring
AusTac SS 316, 10 Ring Top, Milled Bevelled Edge
316 Marine Grade Stainless Steel
Dimensions
Top Dome 25mm
Base of Dome 35mm
Height of Dome 5mm
Stem Diameter 6mm
Stem Lenght 12mm
AVAILABILITY: In stock
O26-CRO Solar Black
Carborundum Insert top (Black Colour )
Polished rim. 316 Marine Grade Stainless Steel
Top Dome 25mm
Base of Dome 35mm
Height of Dome 5mm
Suitable substrates
Ceramic , Glass , Marble
Can also be applied to
Natural Stone ( Granite , Marble Sandstone, Slate
Blue Stone , Basalt , Travertine etc….)
Engineered Stone ( Caesar Stone, Quantum Stone etc)
AVAILABILITY: In stock
Stainless Steel TGSI 10 Ring Saturn Red
AusTac SS 316, 10 Ring Top, Milled Bevelled Edge
Red Polymer Bevelled Edge
316 Marine Grade Stainless Steel
Dimensions
Top Dome 25mm
Base of Dome 35mm
Height of Dome 5mm
Stem Diameter 6mm
Stem Lenght 12mm
AVAILABILITY: In stock
Ceramic TGSi Tile White Hazard (11 tiles / sq M supply only) GST Free Item
AVAILABILITY: In stock
Ceramic TGSi Tile Charcoal Hazard (11 tiles / sq M supply only)
Dimensions :
Top of Dome 25mm
Bottom of Dome 35mm
Height of Dome 5mm
Tile Dimensions :
300x300mm
Tile Thickness :
10mm
AVAILABILITY: In stock
316 Marine Grade Stainless Steel Plate
Carburundum Black top surface stainless steel inserts for 72 units per plate
Milled Bevelled Edge.
Dimension
300x600x2mm(72 units/plate)
Suitable substrates
Natural Stone ( Granite , Marble Sandstone, Slate
Blue Stone , Basalt , Travertine etc….)
Engineered Stone ( Caesar Stone, Quantum Stone etc…)
Concrete Asphalt
Timber , Rubber Vinyl Flooring
Ceramic
AVAILABILITY: In stock